September 11, 2012

07:22 am NexentaStor Project General Discussion: RE: ✓ Is Community Edition Registration currently down?

Yeah. The tick seems good enough. Just something so those looking to help can easily ignore the resolved cases.

September 05, 2012

10:00 am NexentaStor Project General Discussion: RE: Is Community Edition Registration currently down?

Thanks for confirming Matt. I've just checked and it's working again now so must have been temporary. Firebug's not...

08:35 am NexentaStor Project General Discussion: ✓ Is Community Edition Registration currently down?

Just wondering if others are having success / issues registering CE at the moment?
I'm going to http://www.nexenta...

July 06, 2012

08:16 am NexentaStor Project General Discussion: RE: Volumes not available

Christian,
So you've created 2 volumes on the raid controller and the ESX host can see them. I assume you've then...

July 02, 2012

02:44 am NexentaStor Project General Discussion: RE: Write Cache flushing on HBA for ZFS Virtual Machine on ESX

Heiko,
Thanks. I agree it's best to use HBA's with Passthrough if available. I hadn't really considered RDM so m...

02:03 am NexentaStor Project General Discussion: RE: Write Cache flushing on HBA for ZFS Virtual Machine on ESX

Heiko,
Thanks. So on the basis that the cache flush isn't passed through from ESX, I'd conclude that you have to us...

01:49 am NexentaStor Project General Discussion: RE: Using a RAID controller battery backed up

Dan,
I'm new so correct me if I'm wrong..... I understood that synchronous writes are normally acknowledged after b...

June 25, 2012

03:08 am NexentaStor Project General Discussion: Write Cache flushing on HBA for ZFS Virtual Machine on ESX

Any help with this would be greatly appreciated.
We're trialling running a couple of ZFS (Nexenta 3.1.3) virtua...

June 18, 2012

07:38 am NexentaStor Project General Discussion: RE: VMWare VMXNet3 still not working in Nexenta Community Edition 3.1.3

[Edit: Apologies, I was too impatient. I finally got it working by importing the Nexenta VM through VMWare Converte...

June 13, 2012

02:05 pm NexentaStor Project General Discussion: RE: VMWare VMXNet3 still not working in Nexenta Community Edition 3.1.3

Thomas,
Great news. Any chance you could post a quick explanation on the steps you used to copy the driver files fr...