October 18, 2012

09:49 am NexentaStor Project Performance discussions: RE: How to get a stable/quick system on low end hardware

Derek Glover wrote:
> 486dx-2, how I don't miss those ;)
>
> Few questions...
>
> * Curious, what base hardwar...

October 12, 2012

12:57 pm NexentaStor Project General Discussion: RE: iSCSI multipath, dead paths, ESX 5

I'm not sure where to look for network logs honestly. The logging in Nexenta has always left me wanting.
Just cur...

October 11, 2012

01:29 pm NexentaStor Project General Discussion: RE: iscsi target hang during simultaneous svmotions for vsphere5 / NexentaSto...

My write up on my problem with this: http://nexentastor.org/boards/5/topics/8341

01:28 pm NexentaStor Project Help: RE: NAS timing out

My "fixes": [http://nexentastor.org/boards/5/topics/8341](http://nexentastor.org/boards/5/topics/8341)

01:27 pm NexentaStor Project General Discussion: RE: iSCSI multipath, dead paths, ESX 5

We are running Broadcoms as well. We haven't had any issues with the NIC's dropping. We're on the latest BIOS and F...

01:24 pm NexentaStor Project Performance discussions: How to get a stable/quick system on low end hardware

Hello all! I'm writing this to share my experiences and also fixes for some problems that I ran in to.
# **Histor...

11:32 am NexentaStor Project General Discussion: RE: iSCSI multipath, dead paths, ESX 5

I have a feeling you are running in to the same problem that I did.
My Experience:
http://nexentastor.org/board...

October 08, 2012

01:41 pm NexentaStor Project Systems: RE: Trying to design universal storage

Just in case, I would mirror your write (ZIL) cache SSD. Depending on how many VM's you're going to be running at on...

October 02, 2012

04:14 pm NexentaStor Project General Discussion: RE: iscsi target hang during simultaneous svmotions for vsphere5 / NexentaSto...

Looks like I'm a victim of this as well. Disabling VAAI and UNMAP hasn't helped :(
My topic on this: http://nexen...

02:44 pm NexentaStor Project Newbies - Welcome: RE: 'Wrong Validation Code' error

FYI, we were having the same issues. We contacted support and they gave us a code. I'm also in contact with someone...